sha256: 875a384c437cfde33abcf6baae765e02c28b5121c098ab2b10d93a2f4b2cb169
C H A N G E L O G
Please note: Only use the firmware file in connection with the current software-version of the CCUx!
Device: HmIP-DRG-DALI - Homematic IP DALI Gateway
Company: eQ-3, Maiburger Str. 29, 26789 Leer, Germany
Version 1.6.4 - 2025-10-02
** Bugfix
- ETH: RX hangs if too many frames are received very quickly
Version 1.6.2 - 2024-12-10
** Bugfix
- Netfinder responses sometimes with wrong network data
- Netfinder: Race condition when receiving ETH-frames in short order
- Weekprog only switch channel on for short time
- ToogleInversToCounter only switch off
- DALI parameter change after set/unset group
- Switching one group does not trigger status info from other groups
- Error at set switch over group to 75%
- Devices hangs up with Netfinder 2.0.2
** Improvement
- Restoring the dimming status from the time profile after device restart
Version 1.6.0 - 2024-06-12
** Bugfix
- E13 after factory reset
- Error while addressing external eeprom with high addresses
- Device makes inexplicably many Backbone_Sequence_Number_Validations
- The ON_MIN_LEVEL parameter is evaluated inconsistently for a DEC and a direct link.
- At inclusion the mac adresse change after reboot
** Improvement
- Handle DT8 devices with RGBWA, RGBWAF and Primary N > 4 as devices with 4 channels (RGBW / Primary N=4)
- Increase the maximum number of link partners to 20
- Improved error handling for configuration change notification on the device to the AP
- Search for already addressed devices with non-initialized random address
- Duty cycle has no effect with light scene
Version 1.4.10 - 2023-06-28
** Bugfix
- Route management request is sent with local hop limit 7.
- Timeout for sequence number validation is not handled correctly.
Version 1.4.8 - 2023-05-08
** Bugfix
- Much configuration can lead to deadlock
- At the end of a ramp, the last status of the luminaire may not be queried.
- Faulty effect processing at level = 0%
- HSV data in StatusInfo at dimming as tuneable white
- Incorrect status when using UL effects
- Several improvements and bugfixes for effects
** Improvement
- Enable selective reset of individual devices on the bus
Version 1.4.6 - 2023-04-19
** Bugfix
- Effect: Sunrise has wrong default value
- Effect with old value sometimes take the wrong value
- Effect colour with level 0 is not set
Version 1.4.4 - 2023-04-12
** Bugfix
- Parameter "UNIVERSAL_LIGHT_MAX_CAPABILITIES" is not transferred to crRFD after DALI reset
Version 1.4.2 - 2023-04-11
** Bugfix
- After reboot or inclusion device sends frame with wrong frametype
Version 1.4.0 - 2023-03-31
** Bugfix
- Effect / scene with random sequence and endless repetitions stops
- Device does not respond to multicast addresses AllWiredAndBackboneDevices and AllDinRailDevices
** New Feature
- Status extension for the search in the DALI bus
** Improvement
- Adjustment of firmware update blinking when the main processor updates the coprocessor
Version 1.2.2 - 2023-03-01
** Bugfix
- Error while initialization of ethernet phy, if devices was powered down for about 10 seconds
Version 1.2.0 - 2023-01-25
** New Feature
--- END OF FILE ---