sha256: 77696c4ee8640228d6082a217a0bc77d3277edf94d55a9144c04955850c828be
C H A N G E L O G
Please note: Only use the firmware file in connection with the current software-version of the CCUx!
If the switching actuator is operated in two-point control and the firmware version is 1.18.14,
we recommend to remove the batteries from the wall thermostat until the actuator update has been
successfully done. Otherwise the transmission of the firmware will be interrupted.
Device: HmIP-FSI16 - Switch Actuator (16 A) with Push-button Input - flush-mount
Company: eQ-3, Maiburger Str. 29, 26789 Leer, Germany
Version 1 (2 for pluggable).18.22 - 20210412
** Bugfix
- Device responds on multicast frames without ARR bit
- Device sends Status-Frames with Ack-Flag on SwichCommands without ARR-Flag
Version 1 (2 for pluggable).18.20 - 20210115
** Bugfix
- Fixed a bug that with not removing calibration task.
Version 1 (2 for pluggable).18.18 - 20210106
** Improvement
- Switched to usage of internal OSC with permanent calibraton
from the HFXO due to problems when switching non omic loads.
Version 1 (2 for pluggable).18.16 - 20200803
** Bugfix
- Added missing defines for the new statusinfo module in PS,
thus also in PCBS.
Version 1 (2 for pluggable).18.14 - 20200715
** Bugfix
- Device send status continuously after not receiving
application ack from central unit and
leads CCU and device running into duty cycle
Version 1 (2 for pluggable).18.12 - 20200622
** Bugfix
- After inclusion, device sends bidirectional status telegrams
to the CCU after approx. 120s
Version 1 (2 for pluggable).18.10 - 20200527
** Bugfix
- BSM sends Statusframes with ARR every 3 minutes in case that
Central Unit does not send ack
- RSSI-value in AnswerFrame always 0dBm
- BSM does not respond to a keystroke if a switching command was previously
received on the actuator channel from an unknown link partner
** Modification
Version 1 (2 for pluggable).18.6 - 20200309
** Bugfix
- Device sends answers-frame on a TimeInfo from AC to "any-router"-address
- Device sends ack frames if ARR bit is not set
Version 1 (2 for pluggable).18.4 - 20200226
** Bugfix
- Channel keys without function if external link
partner could not be reached and DisableMSGToAC = true
- Device sends status info with "Level with profile Information"
instead of "Binary with profile Information"
- Parameter DisableMSGtoAC without function
if multicast address is set as system partner
- If the button is pressed to fast after restart ,
the device does not switch permanently any more.
Version 1 (2 for pluggable).18.2 - 20200212
** Bugfix
- Device running into duty cycle if CCU or HAP is not available
- Update status info sending rules
- Configuration is not longer shown on LED, if a key is pressed while getting config data
** New Feature
Version 1 (2 for pluggable).16.0 - 20191121
** Bugfix
- Fixed inverted LEDs in bootloader (V1.14.2)
** Modification
** New Feature
--- END OF FILE ---