HMDeviceFirmware

HmIP-FSM_update_V1_6_2_170509.tgz

_{sha256: d01048cdc9c70460764e2018386af5d764be4d9ed2a057b9e7ab1d2996ca740b}

Achtung! Bitte verwenden Sie die Firmware-Datei nur in Verbindung mit der CCU2 ab Version 2.27.7.

Please note: Only use the firmware file in connection with the CCU2 from version 2.27.7.

Version 1 (2 for pluggable).6.2 - 20170427

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F
1764508B

** Bugfix

[HMIP_BSM-33] Fixed a bug with not acting device if the channel key was pressed at a included device.

** Comments *

Version 1 (2 for pluggable).6.1 - 20170426

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F
1764508B

** Bugfix

[HOTFIX] Increased the power to trigger a simulated keypress from 0.1W to 1 W. [HMIP_BSM-32]
[HOTFIX] Value for the new powerstatus is saved after being stable for two measurements. [HMIP_BSM-32]
Corrected default duration of weekprogramm to 0xFF.
Corrected / Optimised sending of a normal ACK/NACK. [CHANGEMANAGEMENT-25]

** Comments *

Version 1 (2 for pluggable).6.0 - 20170425

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F
1764508B

** Bugfix

Increased the pulse for switching the relais from 30 ms to 75 ms.

** Comments

Increased version due to creation of a tag.
Added lock feature to weekprogramm channel.
Added delayed weekprogram status info to status info receiver after change of lock channels.
Removed ramp time from the weekprogram.
Added sending of statusframes for the weekprogram. (After inclusion, cyclic and on request)
Corrected a bug with inhibit channels. [CHANGEMANAGEMENT-51]

Version 1 (2 for pluggable).5.9 - 20170405

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F
1764508B

** Bugfix *

** Comments

Added new weekprogramm.

Version 1 (2 for pluggable).5.8 - 20170328

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F
1764508B

** Bugfix

In auto inclusion mode, the triple burst listener device is not a permanent listener.

** Comments *

Version 1 (2 for pluggable).5.7 - 20170308

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F
1764508B

** Bugfix

Fixed a bug with the sequence counter in the unicast frame (for collecting ACKs) after sending multicast frames due to a long keypress.

** Comments *

Version 1 (2 for pluggable).5.0 - 20161209

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F
1764508B

** Bugfix *

** Comments

Increased version number due to creation of a tag.

Version 1 (2 for pluggable).3.8 - 20161128

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F

** Bugfix

[GRASS] Corrected a bug with RSSI calculation in statusInfo.

** Comments *

Version 1 (2 for pluggable).3.7 - 20161114

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F

** Bugfix

[GRASS] Fixed a bug that caused errors with one partner linked to more channels.

** Comments *

Version 1 (2 for pluggable).3.6 - 20161104

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F

** Bugfix

Fixed a bug with sending unrequested ACKs.

** Comments *

Version 1 (2 for pluggable).3.5 - 20161021

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F

** Bugfix *

** Comments

Added switching the relay as EMC action.

Version 1 (2 for pluggable).3.4 - 20160926

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F

** Bugfix

Fixed a bug with the simulated keypress generated from the powermeter task.

** Comments *

Version 1 (2 for pluggable).3.3 - 20160913

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F

** Bugfix

Added IDLE state to switch task.
Corrected behaviour of the powerfailure function.
Corrected behaviour of the overhead function.
Suppressed sending of StatusInfoFrames if the device is not included.
Corrected behaviour of factory reset if the keyVisual is pressed during powerUp.

** Comments *

Version 1 (2 for pluggable).3.2 - 20160901

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F

** Bugfix

Included hmos 1.16.2 which fixed a bug with exlusion after inclusion

** Comments *

Version 1 (2 for pluggable).3.1 - 20160721

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F

** Bugfix

Corrected size of action type.
Fixed a bug that caused not spawning conditional switch channel task.
Fixed setting of the decision value for falling direction in the conditional switch channel.

** Comments *

Version 1 (2 for pluggable).3.0 - 20160719

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F

** Bugfix *

** Comments

Increased version number due to creation of a tag.

Version 1 (2 for pluggable).1.17 - 20160718

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F

** Bugfix

StutusInfo frames from the switch module can now be send with ARR-Bit. StatusInfo frames from the powermeter are still unidirectional all the time.

** Comments *

Version 1 (2 for pluggable).1.16 - 20160714

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F

** Bugfix *

** Comments

Removed sending of config update requests on buttonpress of the keyvisual for all permanent powered actuators.

Version 1 (2 for pluggable).1.15 - 20160708

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F

** Bugfix

[HmIP-PSM]Fixed bug that first reset step is ready before the timeout of 4 seconds occur.
Suppress boot blinking if reset is in progress.
Fixed a bug with index of parameter arrays if the key visual is used as channel key.

** Comments *

Version 1 (2 for pluggable).1.14 - 20160704

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F

** Bugfix

Conditional switch channel gets now removed in idle state.

** Comments

Set the default values for event delay of output1, meter and conditional channel from 1 to 3 seconds.
Powermeter arrays for averaging now always get resetted if SWITCH_set_level_real() is called.

Version 1 (2 for pluggable).1.13 - 20160616

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F

** Bugfix

[HmIP-PSM]Fixed a bug in evaluation of long keypresses for the pairing mode.
[HmIP-PSM] Fixed a bug with setting parameters for the input channel.

** Comments

[HmIP-PSM] Set default value for the longpress time in the HmIP-PSx devices to 4s.

Version 1 (2 for pluggable).1.12 - 20160613

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F

** Bugfix

Corrected some typos.

** Comments

Added conditional switch channel.

Version 1 (2 for pluggable).1.11 - 20160531

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F

** Bugfix

Reset ACCEPT_ANY_DEVICE to 0.

** Comments

[HmIP-PSM] Major version increased to 2. Minor and Path number will run parallel for all devices.

Version 1.1.10 - 20160518

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F

** Bugfix *

** Comments

[HmIP-PS] Added routines for HmIP-PS.
Renamed CS5490_zc.c /.h to zerocrossing_interrupt.c / .h to be more general.
Smaller changes to the DUMMY_SGTIN.
Reduced number of partners for HmIP-PSx to 20. With this all switch actuators act the same.

Version 1.1.9 - 20160512

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F

** Bugfix

[HmIP-FSM16] Corrected a bug with the switching direction.

** Comments

Added visualisation of the channelstate with the key visual (Including the parameter) to all actuators.

Version 1.1.8 - 20160510

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F

** Bugfix *

** Comments

[HmIP-PSM] Added pairing functionality.

Version 1.1.7 - 20160509

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F

** Bugfix *

** Comments

[HmIP-PSM] Added routing functionality.

Version 1.1.6 - 20160509

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F

** Bugfix

Some style changes.
Corrected calculation of energycount.

** Comments

Some optimisations on startup.

Version 1.1.5 - 20160503

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F

** Bugfix *

** Comments

Corrected some comments and function headers.
Corrected parameter for energy threshold. It was one byte but has to be two byte.
[HmIP-PSM] Added parameter LED_DISABLE in list1 of the real channel.

Version 1.1.4 - 20160502

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F

** Bugfix *

** Comments

[HmIP-PSM] Added default link between key visual and the switch channel.
[HmIP-PSM] Added routines to do visialisation of the channel state with the key visual.
[HmIP-PSM] Corrected factory reset gesture (only valid at power up).

Version 1.1.3 - 20160428

** Related Hardware

1424102A + 1434181A
1564305B
1554267B
1454104F

** Bugfix *

** Comments

[HmIP-PSM] Added key routines for switching with the key visual.

Version 1.1.2 - 20160426

** Related Hardware

1424102A + 1434181A
1564305B
1554267B

** Bugfix

Fixed to which multicast addresses the device listens.

** Comments

Startet porting code to the PSM hardware.

Version 1.1.1 - 20160425

** Related Hardware

1424102A + 1434181A
1564305B
1554267B

** Bugfix

Fixed a bug with ACKs to config update request frames.

** Comments *

Version 1.1.0 - 20160413

** Related Hardware

1424102A + 1434181A
1564305B
1554267B

** Bugfix *

** Comments

Increased version number due to creation of a tag.

Version 0.5.25 - 20160407

** Related Hardware

1424102A + 1434181A
1564305B
1554267B

** Bugfix

Fixed another bug with loading and accepting new parameter.

** Comments *

Version 0.5.24 - 20160407

** Related Hardware

1424102A + 1434181A
1564305B
1554267B

** Bugfix

Fixed a bug with eventdelay of the switch channels. (wrong channel "group" was read)
Fixed a bug with reading out configuration parameters for the switch channel(s).

** Comments *

Version 0.5.23 - 20160405

** Related Hardware

1424102A + 1434181A
1564305B
1554267B

** Bugfix

Added forgotten initialisation of of reset pin for FSM16.

** Comments

Added / Corrected Power fail detection for bistable relais.

Version 0.5.22 - 20160401

** Related Hardware

1424102A + 1434181A
1564305B
1554267B

** Bugfix

Redesign of sending ACKs.
Added marker for rx options.

** Comments *

Version 0.5.21 - 20160331

** Related Hardware

1424102A + 1434181A
1564305B
1554267B

** Bugfix

Fixed a bug with keypress counter in simulated keypresses.
fixed problem that the internal ACK frame is send to the address of the link partner, which has received while waiting for tx callback.
fixed problem hat the rx is not restarted while waiting for tx callback
Fixed a bug with sequence counter handling for statusinfo.

** Comments

Exchanged KEY_1 and KEY_2 to uniform channel layout of HmIP priducts. Now Channel 2 is the upper button but upper butten holds its old function.

Version 0.5.20 - 20160330

** Related Hardware

1424102A + 1434181A
1564305B
1554267B

** Bugfix

Fixed a bug with checking the sender address (Mistake in version 0.5.17 checked not on receiving switch commands but in direct execution case)

** Comments *

Version 0.5.19 - 20160329

** Related Hardware

1424102A + 1434181A
1564305B
1554267B

** Bugfix *

** Comments

Added answering of time information frames.

Version 0.5.18 - 20160329

** Related Hardware

1424102A + 1434181A
1564305B
1554267B

** Bugfix *

** Comments

Changed behaviour of longkeypress in the internal link from toggle to the same behaviour as the short one.

Version 0.5.17 - 20160324

** Related Hardware

1424102A + 1434181A
1564305B
1554267B

** Bugfix

Fixed handling of seq-counter of different sender.
Fixed executing of internal send commands.

** Comments

Corrected some typos, comments and style.
Removed unnecessary saving of sequence counter.
Reverted change of powerUp-jumptarget enumeration.

Version 0.5.16 - 20160322

** Related Hardware

1424102A + 1434181A
1564305B
1554267B

** Bugfix

Fixed setting and sending of binary state from the real channel.
Fixed powerup behaviour. NOTE: PowerUp action is triggert 2s after boot due to settle time of the measurement IC!
Fixed some typos and style.

** Comments *

Version 0.5.15 - 20160304

** Related Hardware

1424102A + 1434181A
1564305B
1554267B

** Bugfix

Fixed a bug with receiving new configuration for the powermeter channel.

** Comments *

Version 0.5.14 - 20160303

** Related Hardware

1424102A + 1434181A
1564305B
1554267B

** Bugfix

Fixed a bug with numbering of parameters for powermeter channel.

** Comments *

Version 0.5.13 - 20160301

** Related Hardware

1424102A + 1434181A
1564305B
1554267B

** Bugfix

Smaller cleanup and correction of typos.

** Comments

Added channel information to the statusinfo frame.
Actualisations of information in the LevelInfo frame

Version 0.5.12 - 20160224

** Related Hardware

1424102A + 1434181A
1564305B
1554267B

** Bugfix

Fixed two small logic bugs in application.c.
Fixed a bug with sending long keypresses.

** Comments

Added support for bistable relays.

Version 0.5.11 - 20160218

** Related Hardware

1424102A + 1434181A
1564305B
1554267B

** Bugfix

Corrected a bug with long keypress.

** Comments

Corrected number of possible partners for the powermeter channel.
Removed the small delay that was inserted in version 0.5.10.

Version 0.5.10 - 20160210

** Related Hardware

1424102A + 1434181A
1564305B
1554267B

** Bugfix *

** Comments

Added a small delay between receiving a "force statusinfo" telegramm trom testrunner and sending it because testrunner has a bug and/or is to slow to send the command and start the receive step.

Version 0.5.9 - 20160205

** Related Hardware

1424102A + 1434181A
1564305A
1554267B

** Bugfix *

** Comments

Added "force statusinfo" to the testmode.
Added saving of calibration gain values.

Version 0.5.8 - 20160203

** Related Hardware

1424102A + 1434181A
1564305A
1554267B

** Bugfix

Corrected teh handling of channel numbers with direct executions.
Corrected some size conflicts NUMBER_OF_ACT_CHANNELS and NUMBER_OF_SWITCH_CHANNELS in combination with virtual channels.
Fixed a bug in the order of calibration steps.

** Comments *

Version 0.5.7 - 20151218

** Related Hardware

1424102A + 1434181A
1564305A
1554267B

** Bugfix *

** Comments

Moved handling of Request Time Service frame from testmode to application receive callback.
Added handling of timeinfo request frames.

Version 0.5.6 - 20151217

** Related Hardware

1424102A + 1434181A
1564305A
1554267B

** Bugfix

Added MAX_PARTNERS_CHANNEL_POWERMETER to the maximal number of partner.
Fixed some minor bugs in getter functions for the device flags of LIST0

** Comments

Implemented requesting and receiving time information.
Implemented sending of own time information.
Implemented handling of new LIST0 parameters.
Implemented handling of new LIST12 parameters.

Version 0.5.5 - 20151210

** Related Hardware

1424102A + 1434181A
1564305A
1554267B

** Bugfix *

** Comments

Added files an functions for the weekprogramm (first time compiling, not ready implemented).

Version 0.5.4 - 20151127

** Related Hardware

1424102A + 1434181A
1564305A
1554267B

** Bugfix *

** Comments

Implemented virtual Channels also to PowerUpAction.

Version 0.5.3 - 20151126

** Related Hardware

1424102A + 1434181A
1564305A
1554267B

** Bugfix

Corrected size of persist data in the linker options.
Corrected some comments.

** Comments

Implemented virtual channels.

Version 0.5.2 - 20151120

** Related Hardware

1424102A + 1434181A
1564305A
1554267B

** Bugfix *

** Comments

Corrected handling of sequence counter.

Version 0.5.1 - 20151113

** Related Hardware

1424102A + 1434181A
1564305A
1554267B

** Bugfix *

** Comments

Corrected some default values for the parameter.

Version 0.5.0 - 20151111

** Related Hardware

1424102A + 1434181A
1564305A
1554267B

** Bugfix *

** Comments

Increased the version number due to creation of a tag.
Added sending of NAK_INVALID_CHANNEL.

Version 0.3.14 - 20151109

** Related Hardware

1424102A + 1434181A
1564305A
1554267B

** Bugfix

Fixed a small bug in the powerUp action.
Corrected type of second parameter ("permanent") of PROFILE_timercalc-function (uint8_t -> bool_t).

** Comments

Resorted the order of writing the CS5490 registers on calibration.

Version 0.3.13 - 20151105

** Related Hardware

1424102A + 1434181A
1564305A
1554267B

** Bugfix

Added m_useTmp to the switch module to be able to do correct configuration.
Corrected a bug in the factory reset routines regarding the key number.

** Comments

Added parameter CURRENTDETECTION_BEHAVIOR.
Added case SERVICE_ID_FORCE_STATUSTEL in preparation for the calibration by the testtool.
Added calibration routines.
Removed obsolete application_dummy files.
Removed some obsolete pin definitions because these were unified across BSM and FSM.

Version 0.3.12 - 20151028

** Related Hardware

1424102A + 1434181A
1564305A

** Bugfix *

** Comments

Added routines to save and read out the release delay time.

Version 0.3.11 - 20151028

** Related Hardware

1424102A + 1434181A
1564305A

** Bugfix *

** Comments

Added routines for measuring the delay times of the relay.
Added routines to save and read out the operate delay time.

Version 0.3.10 - 20151023

** Related Hardware

1424102A + 1434181A
1564305A

** Bugfix *

** Comments

Added testroutines for LEDs and KEYs.

Version 0.3.9 - 20151023

** Related Hardware

1424102A + 1434181A
1564305A

** Bugfix

Fixed a bug with sending error frames.
Removed division by two at the calculation of the switching times because the worst possible switch time of the relais is longer as half a period and would cause negative switching times.

** Comments

Removed unnecessary parameter for zc-delay.
Removed some warnings.
Small change with sending NACKs.
Added a trigger for sending an ACK after direct executon frame with FRAMES_SNC_ACTION_CODE_RAMP_START was received.
Instead of three groups of one-dimensional arrays for power-up action now one groups of two-dimensional arrays is used.

Version 0.3.8 - 20151019

** Related Hardware

1424102A + 1434181A
1564305A

** Bugfix

Fixed a bug in the key routines regarding inclusion requests and simultan switch commands.
Corrected location of GDO2 (transceiver IO) in the hardware config.

** Comments

Added Task for internal temperatur measurement.
Added sending of error frames.
Moved or deleted some functions from application_dummy.c
Corrected default relay delays for better accuracy.
Did some code clean-up and corrections of comments.

Version 0.3.7 - 20151009

** Related Hardware

1424102A + 1434181A
1564305A

** Bugfix

Added initial configuration of the relay pin in the switch module.

** Comments

Added zero-crossing-switching (functionality without HMOS -> directly with the emlib).
Changed the return values of APPLICATION_KEY_key_evaluation to a bitarray to be able to handle a switch command of a not included device and sending out inclusion requests.

Version 0.3.6 - 20150930

** Related Hardware

1424102A + 1434181A
1564305A

** Bugfix

Small change if the reset procedure gets aborted with a short keypress.

** Comments

Implemented report link partner problem.

Version 0.3.5 - 20150929

** Related Hardware

1424102A + 1434181A
1564305A

** Bugfix

Switched read out of FUP and DRDY flags to be able to read the frequency with faster data interval.
Corrected ome wrong coments.

** Comments

Changed the reset procedure to fit for mains powered devices. -> added Error state and removed state for inital keypress.

Version 0.3.4 - 20150928

** Related Hardware

1424102A + 1434181A
1564305A

** Bugfix *

** Comments

Added sending of StatusInfo frames after entering a new profile section.
Now the powermeter and the switch module can cancel a pending statusinfo from the other module if the own (delay) timeout is reached.

Version 0.3.3 - 20150924

** Related Hardware

1424102A + 1434181A
1564305A

** Bugfix

Added sending of a StatusInfo telegramm after inclusion.

** Comments

Added sending of StatusInfo frames in the powermeter task.
Added sending of Powermeter-values in the statusinfo.
Added LevelInfo as ACK (Just a dummy, channel is still wrong).
Did some optimisations with sending frames in the application module.
Commented sending of ACKs in the switch module (this seems to be done in the profile module already).
Commented sending of StatusInfos in the switch module (this seems to be done in the profile module already).

Version 0.3.2 - 20150915

** Related Hardware

1424102A + 1434181A
1564305A

** Bugfix

Changed sample number from 500 to 400.
Corrected the device type.

** Comments

Now the value of m_pavg (the last measured power value) is taken to sense the network status. This can be done because the value does not to be very accurate (average).

Version 0.3.1 - 20150911

** Related Hardware

1424102A + 1434181A
1564305A

** Bugfix

Changed the function header of SWITCH_get_state

** Comments

Implemented functionality that the powermeter channel simulates a keypress on button one or two to trigger the profile if someone presses another switch in the bridge network.
Implemented features to just switch the relay on if the chennel is off and vise versa.
Implemented further init step of the CS5490 to change the sample count (not the sample rate!).

Version 0.3.0 - 20150904

** Related Hardware

1424102A + 1434181A
1564305A

** Bugfix *

** Comments

Removed some parts to added some HmIP-FSM functionality.

Version 0.1.10 - 20150903

** Related Hardware

1424102A + 1434181A
1564305A

** Bugfix *

** Comments

Did some code cleanup and commentation.
Added powerstatus mechanism that changes DO of CS5490 and stores the value to a module variable.

Version 0.1.9 - 20150706

** Related Hardware

1424102A + 1434181A
1564305A

** Bugfix *

** Comments

Added files for powermeter functionality.

Version 0.1.8 - 20150702

** Related Hardware

1424102A + 1434181A
1564305A

** Bugfix *

** Comments

Added delays to the tasks if they try to call the parameter module and get a BUSY.

Version 0.1.7 - 20150630

** Related Hardware

1424102A + 1434181A
1564305A

** Bugfix

Correted some behavior with sending and receiving ACKs.
Corrected default behaviour of long keypress.

** Comments *

Version 0.1.6 - 20150626

** Related Hardware

1424102A + 1434181A
1564305A

** Bugfix

Simplified parameter lists.

** Comments

Removed some of my own warnings.
Removed triggering of "NACK peer unknown" because this is handled in the STACK / HMOS.
Further process in multi channel functionality.
Added functionality to send NACKs and statusinfo frames with set ACK bit.

Version 0.1.5 - 20150624

** Related Hardware

1424102A + 1434181A
1564305A

** Bugfix

Fixed some parameter issues.

** Comments *

Version 0.1.4 - 20150623

** Related Hardware

1424102A + 1434181A
1564305A

** Bugfix *

** Comments

Added switch module.
First steps of multi channel functionality added.

Version 0.1.3 - 20150618

** Related Hardware

1424102A + 1434181A
1564305A

** Bugfix *

** Comments

Further implementing of the profile task.
Made some changes to the creation of the internal link.
Added dummy-functionality as output.

Version 0.1.2 - 20150617

** Related Hardware

1424102A + 1434181A

** Bugfix *

** Comments

Implemented creation of internal link.
Added profile task. (not tested yet!)
Added application_dummy for missiong (SWITCH-) functions to make the profile task compile.

Version 0.1.1 - 20150615

** Related Hardware

1424102A + 1434181A

** Bugfix *

** Comments

Changes in the LED callbacks due to changes in HMOS.
Renaming of the functions in the application key module.

Version 0.1.0 - 20150611

** Related Hardware

1424102A + 1434181A

** Bugfix

Corrected DEVICE_INFO_OPERATION_MODES.

** Comments

Added Button-task.
Added creating and handling of config request frames.
Added creating and sending of unconditional switch command frames.
Added define for relay port / pin.

Version 0.0.1 - 20150605

** Related Hardware

1424102A + 1434181A

** Bugfix *

** Comments

Initial commit with template as new start of the project.

--- END OF FILE ---

Version -

** Bugfix

<JIRA Vorgangsnummer (optional)> -
<JIRA Vorgangsnummer (optional)> -

** New Feature

<JIRA Vorgangsnummer (optional)> -
<JIRA Vorgangsnummer (optional)> -

** Modification

<JIRA Vorgangsnummer (optional)> -
<JIRA Vorgangsnummer (optional)> -

** Improvement

<JIRA Vorgangsnummer (optional)> -
<JIRA Vorgangsnummer (optional)> -

** Bugs

<JIRA Vorgangsnummer (optional)> -
<JIRA Vorgangsnummer (optional)> -

** Related Hardware

- <zusätzliche Hinweise, Modifikationen usw.>

** Comments

This site is open source. Improve this page.