sha256: cf65d237ed2dc9b733b63c68c5e1cbac68fba8c2cf124a77ee05f1eeb4a983ff
C H A N G E L O G
Please note: Only use the firmware file in connection with the current software-version of the CCUx!
Device: HmIP-HAP - Access Point
alte Bezeichnung: YOU-HAP-TTU
Company: eQ-3, Maiburger Str. 29, 26789 Leer, Germany
Version 2.4.28 - 2022-09-16
** Bugfix
- The access point sends frames to the server that are too long.
- Replies to frames from the server are lost.
** Improvement
- Set different timeouts for backbone Routers and backbone devices
Version 2.4.24 - 2022-05-12
** Bugfix
- The HAP treis to send a frame to all wired devices via any router
Version 2.4.20 - 2022-04-06
** Bugfix
- The HAP will reboot if it does not receive a response to an Inclusion Accept.
Version 2.4.18 - 2022-03-29
** Bugfix
- The HAP sends a route management frame with its own address marked as unreachable.
Version 2.4.16 - 2022-01-26
** Bugfix
- The access points (HAP/DRAP) always send the Manufacturer Code 0x01 (EQ3) in the Inclusion Request, even with OEM variants.
- Device becomes continuous BURST transmitter in case of cloud failure
- HAP answers status frames (ARR) with burst frames.
** New Feature
- Forward backbone route management frames to the cloud server
Version 2.4.12 - 2021-07-27
** Bugfix
- The HAP tries to start a sequence number validation on all frames and takes the destination address of the receiving frame as the source address.
Version 2.4.10 - 2021-07-15
** Bugfix
- FactoryReset first button press duration too long
Version 2.4.8 - 2021-06-29
** Bugfix
- KeyVisual key press data for long button press wrong
** Improvement
- Stronger evaluation of the RSSI value during routing
Version 2.4.4 - 2021-04-28
** Bugfix
- HTTP client hangs, if the previous connection was not closed.
- The access point interrupts the connection to the cloud server if the lookup server has delivered an incorrect URL.
- Incorrect KeyVisual signal when the AP disconnects from the cloud server.
- Wrong priority for frames to event listener
- The AccessPoint sends a response to an empty RM V1 request.
- HAP glows permanently turquoise in a Singel HAP installation
- Factory reset is also possible during operation.
- Fehler bei nicht erreichbarer UpdateURL
- Invalid Tcp/IP packet in the web bootloader.
- Websocket connection delay is only applied after restart.
- HAP do not respond to IGMPv3 Membership Queries
** New Feature
- Request routing information over HAP protocol
- Live OTAU Service
** Improvement
- Improve system behavior when HmIP-HAP has no internet connection.
Version 2.2.24 - 2020-12-16
** Bugfix
- Frames can no longer be sent. The stack remains in the busy state.
Version 2.2.18 - 2020-10-07
** Bugfix
- OTAU: "Update Data" frames are send with burst.
Version 2.2.16 - 2020-09-23
** Bugfix
- Web-Bootloader cancels download of CoProzessor update.
- Download of update files will not start, if FIN,ACK from checkversion is not acked.
Version 2.2.12 - 2020-08-26
** Bugfix
- Multicast Readressing is also applied to INTERFACE_LOCAL/CLOUD
Version 2.2.10 - 2020-08-24
** Bugfix
- If the application is defective, an incorrect application version is reported to the update server.
** Improvement
- No longer route cyclic multicast frames.
- Flashing behaviour when the centre is not accessible (flashing turquoise)
Version 2.2.4 - 2020-08-07
** Bugfix
- The device-specific configuration can no longer be retrieved with Netfinder.
Version 2.2.0 - 2020-07-16
** Bugfix
- With the custom lookup address, the path is not processed correctly.
** New Feature
** Improvement
- Change the default update URL
- Improve the connection to the cloud server.
Version 2.2.2 - 2020-07-24
** Bugfix
- Wrong app sequence counter in status response frame.
** Improvement
- Do not accept frames to AnyRouter if it is known that it is not routed.
Version 2.0.40 - 2020-10-05
** Bugfix
- Download of update files will not start, if FIN,ACK from checkversion is not acked.
Version 2.0.36 - 2019-10-16
** Bugfix
- The HAP crashes and restarts when DHCP is switched off.
Version 2.0.34 - 2019-10-11
** Bugfix
- If the ICMP ping fails, but the lookup server query succeeds, the KeyVisual color is not updated.
- The local bootloader returns a wrong value during the update.
Version 2.0.32 - 2019-10-08
** Bugfix
- No connection to the server is established and the KeyVisual lights up yellow permanently.
** Improvement
- To test the Internet connection, an attempt is made to send a ping to the lookup server; if the ping fails, an attempt is made to establish a connection anyway.
Version 2.0.26 - 2019-07-23
** Bugfix
- With the custom lookup address, the path is not processed correctly.
- HAP firmware stops after a FactoryReset is cancelled.
- FactoryReset has no timeout.
Version 1.2.26 - 2020-10-06
** Bugfix
- Download of update files will not start, if FIN,ACK from checkversion is not acked.
Version 1.2.12 - 2018-04-19
** Bugfix
- the configuration data will sometimes be corrupted during the update, causing a factory reset
- Look up server is requested just one time after startup
--- END OF FILE ---