Required CCU firmware version: ≥ 3.65.6
sha256: 40d616faaeefabdc98bbe1384d2396024726d5a2bc4f4369dc54bb5285f271b4
C H A N G E L O G
Please note: Only use the firmware file in connection with the current software-version of the CCUx!
Device: HmIP-MOD-WD-VK - Homematic IP Module for VEKA window drives
Company: eQ-3, Maiburger Str. 29, 26789 Leer, Germany
Version 1.2.14 - 2026-02-23
** Bugfix
- Powerup action doesn't work reliably
- Missing status info after direct execution command
Version 1.2.12 - 2026-01-08
** Bugfix
- Corrected communication timing with different VEKA firmware versions
- Backup-Channel not triggered
- Powerup action doesn't work reliably
- Error code Communication not set when bus line is interrupted
- No ErrorCode for ErrorDrive in status frame
- No ErrorCodes for LowVoltage in status frame
- Actor profile freezes after communication with LinkPartner
- After receiving "driving" command a sporadic communication error occurs and is reported by status frame und LED
- Wrong Parametervalue Channel2 List1: PowerUp_Jumptarget
Version 1.2.10 - 2025-10-09
** Bugfix
- Operating mode "Pole Change" does not work any more since V1.2.2
Version 1.2.8 - 2025-09-29
** Bugfix
- FactoryReset only possible with PowerUp
Version 1.2.6 - 2025-09-22
** New Feature
- Support of new VEKA Drives with changed status handling
** Improvement
- Changed interval for status request to the veka drive from 5s to 2s
Version 1.2.2 - 2025-09-18
** New Feature
- Support of new VEKA Drives with changed status handling
** Improvement
- Changed interval for status request to the veka drive from 5s to 2s
Version 1.0.6 - 2022-07-27
** Bugfix
- Stop-Command ends a reference run after timeout
- Wrong status info if VEKA drive is disconnected (bus or supply voltage)
- Missing stop command after repeated key presses on local keys
Version 1.0.4 - 2022-07-21
** Bugfix
- Stop-Command ends a reference run after timeout
- Wrong status info if VEKA drive is disconnected (bus or supply voltage)
- Missing stop command after repeated key presses on local keys
Version 1.0.2 - 2022-07-08
** Bugfix
- Missing stop command after repeated key presses on local keys
- At off/on delay the drive run to the other direction
Version 1.0.0 - 2022-06-30
** Bugfix
- Green LED feedback although App-Ack is missing
- Device keys not working correctly
- Drive Error State is read from wrong register
** New Feature
- Add level for a tilted window to actuator channel status
--- END OF FILE ---