sha256: 154604852a17c4661b425718e7dd04e81d209dc16ede9cd5a6198fa1c963594e
Achtung! Bitte verwenden Sie die Firmware-Datei nur in Verbindung mit der CCU2 ab Version 2.29.18.
Nach dem erfolgreichen Übertragen des Updates ist es erforderlich den HmIP-PSM-CH einmal von der CCU2 ab- und wieder anzulernen, damit alle neuen Funktionen in der CCU2 korrekt angezeigt werden.
Please note: Only use the firmware file in connection with the CCU2 from version 2.29.18.
After the update has been successfully transferred, it is necessary to disconnect the HmIP-PSM-CH from the CCU2 and teach-in the device again. So that all new functions are displayed in the CCU2.
Changelog:
Version 1 (2 for pluggable).6.2 - 20170427
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
- 1764508B
** Bugfix
- [HMIP_BSM-33] Fixed a bug with not acting device if the
channel key was pressed at an included device.
** Comments
*
Version 1 (2 for pluggable).6.1 - 20170426
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
- 1764508B
** Bugfix
- [HOTFIX] Increased the power to trigger a simulated
keypress from 0.1W to 1 W. [HMIP_BSM-32]
- [HOTFIX] Value for the new powerstatus is saved after
being stable for two measurements. [HMIP_BSM-32]
- Corrected default duration of weekprogramm to 0xFF.
- Corrected / Optimised sending of a normal ACK/NACK. [CHANGEMANAGEMENT-25]
** Comments
*
Version 1 (2 for pluggable).6.0 - 20170425
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
- 1764508B
** Bugfix
- Increased the pulse for switching the relais
from 30 ms to 75 ms.
** Comments
- Increased version due to creation of a tag.
- Added lock feature to weekprogramm channel.
- Added delayed weekprogram status info to status info
receiver after change of lock channels.
- Removed ramp time from the weekprogram.
- Added sending of statusframes for the weekprogram.
(After inclusion, cyclic and on request)
- Corrected a bug with inhibit channels. [CHANGEMANAGEMENT-51]
Version 1 (2 for pluggable).5.9 - 20170405
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
- 1764508B
** Bugfix
*
** Comments
Version 1 (2 for pluggable).5.8 - 20170328
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
- 1764508B
** Bugfix
- In auto inclusion mode, the triple burst listener device is not a permanent listener.
** Comments
*
Version 1 (2 for pluggable).5.7 - 20170308
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
- 1764508B
** Bugfix
- Fixed a bug with the sequence counter in the unicast frame
(for collecting ACKs) after sending multicast frames due
to a long keypress.
** Comments
*
Version 1 (2 for pluggable).5.0 - 20161209
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
- 1764508B
** Bugfix
*
** Comments
- Increased version number due to creation of a tag.
Version 1 (2 for pluggable).3.8 - 20161128
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
** Bugfix
- [GRASS] Corrected a bug with RSSI calculation in statusInfo.
** Comments
*
Version 1 (2 for pluggable).3.7 - 20161114
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
** Bugfix
- [GRASS] Fixed a bug that caused errors with one partner linked
to more channels.
** Comments
*
Version 1 (2 for pluggable).3.6 - 20161104
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
** Bugfix
- Fixed a bug with sending unrequested ACKs.
** Comments
*
Version 1 (2 for pluggable).3.5 - 20161021
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
** Bugfix
*
** Comments
- Added switching the relay as EMC action.
Version 1 (2 for pluggable).3.4 - 20160926
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
** Bugfix
- Fixed a bug with the simulated keypress generated from
the powermeter task.
** Comments
*
Version 1 (2 for pluggable).3.3 - 20160913
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
** Bugfix
- Added IDLE state to switch task.
- Corrected behaviour of the powerfailure function.
- Corrected behaviour of the overhead function.
- Suppressed sending of StatusInfoFrames if the device is
not included.
- Corrected behaviour of factory reset if the keyVisual is
pressed during powerUp.
** Comments
*
Version 1 (2 for pluggable).3.2 - 20160901
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
** Bugfix
- Included hmos 1.16.2 which fixed a bug with exlusion after inclusion
** Comments
*
Version 1 (2 for pluggable).3.1 - 20160721
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
** Bugfix
- Corrected size of action type.
- Fixed a bug that caused not spawning conditional switch
channel task.
- Fixed setting of the decision value for falling direction
in the conditional switch channel.
** Comments
*
Version 1 (2 for pluggable).3.0 - 20160719
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
** Bugfix
*
** Comments
- Increased version number due to creation of a tag.
Version 1 (2 for pluggable).1.17 - 20160718
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
** Bugfix
- StutusInfo frames from the switch module can now be send
with ARR-Bit.
StatusInfo frames from the powermeter are still
unidirectional all the time.
** Comments
*
Version 1 (2 for pluggable).1.16 - 20160714
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
** Bugfix
*
** Comments
- Removed sending of config update requests on buttonpress
of the keyvisual for all permanent powered actuators.
Version 1 (2 for pluggable).1.15 - 20160708
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
** Bugfix
- [HmIP-PSM]Fixed bug that first reset step is ready before
the timeout of 4 seconds occur.
- Suppress boot blinking if reset is in progress.
- Fixed a bug with index of parameter arrays if the key
visual is used as channel key.
** Comments
*
Version 1 (2 for pluggable).1.14 - 20160704
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
** Bugfix
- Conditional switch channel gets now removed in idle state.
** Comments
- Set the default values for event delay of output1,
meter and conditional channel from 1 to 3 seconds.
- Powermeter arrays for averaging now always get resetted
if SWITCH_set_level_real() is called.
Version 1 (2 for pluggable).1.13 - 20160616
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
** Bugfix
- [HmIP-PSM]Fixed a bug in evaluation of long keypresses
for the pairing mode.
- [HmIP-PSM] Fixed a bug with setting parameters for the
input channel.
** Comments
- [HmIP-PSM] Set default value for the longpress time in the
HmIP-PSx devices to 4s.
Version 1 (2 for pluggable).1.12 - 20160613
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
** Bugfix
** Comments
- Added conditional switch channel.
Version 1 (2 for pluggable).1.11 - 20160531
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
** Bugfix
- Reset ACCEPT_ANY_DEVICE to 0.
** Comments
- [HmIP-PSM] Major version increased to 2.
Minor and Path number will run parallel for all devices.
Version 1.1.10 - 20160518
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
** Bugfix
*
** Comments
- [HmIP-PS] Added routines for HmIP-PS.
- Renamed CS5490_zc.c /.h to zerocrossing_interrupt.c / .h
to be more general.
- Smaller changes to the DUMMY_SGTIN.
- Reduced number of partners for HmIP-PSx to 20.
With this all switch actuators act the same.
Version 1.1.9 - 20160512
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
** Bugfix
- [HmIP-FSM16] Corrected a bug with the switching direction.
** Comments
- Added visualisation of the channelstate with the key
visual (Including the parameter) to all actuators.
Version 1.1.8 - 20160510
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
** Bugfix
*
** Comments
- [HmIP-PSM] Added pairing functionality.
Version 1.1.7 - 20160509
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
** Bugfix
*
** Comments
- [HmIP-PSM] Added routing functionality.
Version 1.1.6 - 20160509
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
** Bugfix
- Some style changes.
- Corrected calculation of energycount.
** Comments
- Some optimisations on startup.
Version 1.1.5 - 20160503
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
** Bugfix
*
** Comments
- Corrected some comments and function headers.
- Corrected parameter for energy threshold. It was one byte
but has to be two byte.
- [HmIP-PSM] Added parameter LED_DISABLE in list1 of the
real channel.
Version 1.1.4 - 20160502
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
** Bugfix
*
** Comments
- [HmIP-PSM] Added default link between key visual and
the switch channel.
- [HmIP-PSM] Added routines to do visialisation of the
channel state with the key visual.
- [HmIP-PSM] Corrected factory reset gesture
(only valid at power up).
Version 1.1.3 - 20160428
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
- 1454104F
** Bugfix
*
** Comments
- [HmIP-PSM] Added key routines for switching with the key visual.
Version 1.1.2 - 20160426
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
** Bugfix
- Fixed to which multicast addresses the device listens.
** Comments
- Startet porting code to the PSM hardware.
Version 1.1.1 - 20160425
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
** Bugfix
- Fixed a bug with ACKs to config update request frames.
** Comments
*
Version 1.1.0 - 20160413
** Related Hardware
- 1424102A + 1434181A
- 1564305B
- 1554267B
** Bugfix
*
** Comments
- Increased version number due to creation of a tag.
--- END OF FILE ---