sha256: 1746feadae1f219a915e0a216dca0d2755b89333d49147950aca5ffb84a0e364
Achtung! Bitte verwenden Sie die Firmware-Datei nur in Verbindung mit der aktuellsten CCU2/3 Version.
Please note: Only use the firmware file in connection with the latest CCU2/3 version.
Changelog:
Version 1.2.10 - 20180312
** Related Hardware
** Bugfix
- [HMIP_SRH-21]Fixed a bug that caused setting of alarmworthy
event flag with unidirectional or cyclic status frames.
** Comments
*
Version 1.2.8 - 20180308
** Related Hardware
** Bugfix
- Fixed a bug with receiving answers of conditional switch commands.
** Comments
*
Version 1.2.6 - 20180219
** Related Hardware
** Bugfix
*
** Comments
- Changed counting of event_counter to new mechanism
(boot:0; other:[1..252]). [CHANGEMANAGEMENT-483]
[HMIP_SRH-20]
- Reworked the mechanism of receiving answers.
Version 1.2.4 - 20180209
** Related Hardware
** Bugfix
- Added separate keypress counter for window and backup.
- All pending flags are now handled after boot process is
finished. Otherwise it is possible to miss an acknowledgment
frame of a frame at boot.
** Comments
*
Version 1.2.2 - 20180207
** Related Hardware
** Bugfix
- Added first statusinfo to the backup mechanism.
** Comments
*
Version 1.2.0 - 20180205
** Related Hardware
** Bugfix
*
** Comments
- HMOS 1.20.4
- Increased version due to creation of a tag.
Version 1.1.5 - 20180201
** Related Hardware
** Bugfix
- Added mechanism to prevent overwriting of a alarmworthy
event with a not alarmworthy one.
-> Fast window open and close now also causes a backup.
** Comments
*
Version 1.1.4 - 20180201
** Related Hardware
** Bugfix
- Fixed a bug with missing MAC_ACKs after blinking.
[HMIP_SRH-18]
** Comments
- Added new parameter DISABLE_MSG_TO_AC.
[HMIP_SRH-17][CHANGEMANAGEMENT-223]
Version 1.1.3 - 20180201
** Related Hardware
** Bugfix
*
** Comments
- Added alarm-channel and depending functionality for
security solution
Version 1.1.2 - 20170803
** Related Hardware
** Bugfix
- Fixed bug in sleep behaviour.
[HMIP_SRH-11][CHANGEMANAGEMENT-100]
** Comments
*
Version 1.1.1 - 20160425
** Related Hardware
** Bugfix
- Fixed a bug with ACKs to config update request frames.
** Comments
*
Version 1.1.0 - 20160413
** Related Hardware
** Bugfix
*
** Comments
- Incremented version number due to creation of a tag.
Version 0.3.0 - 20160408
** Related Hardware
** Bugfix
- Now the device sends statusinfo after boot (again).
- Added receiving of status request frames.
** Comments
- Incremented version number due to creation of a tag.
Version 0.1.6 - 20160317
** Related Hardware
** Bugfix
- Corrected a bug with the first cyclic status info frame.
** Comments
*
Version 0.1.5 - 20160316
** Related Hardware
** Bugfix
- Fixed a bug with switching LEDs in Testmode.
** Comments
*
Version 0.1.4 - 20151001
** Related Hardware
** Bugfix
*
** Comments
- Changed the reset precedure to the new rules.
(no device functionality and boot blinking during reset,
restart of the device if reset is not done correctly or
gets aborted)
- Parameter now get loaded on startup to be abble to do the
factory reset (local reset needs to be checked).
- Changed Full RX timeout between sending start and the
callback from ARR-timout to a fix value (1000000) to be
able to check the new router functionality.
Version 0.1.3 - 20150902
** Related Hardware
** Bugfix
- Again corrected default values for filterA and filterB.
(made mistake in version 0.1.1)
- YOU_CTS_OPT_SMI_BN-29 - The Full RX mode of the trx is
retriggered in the tx callback of the conditional switch
command.
** Comments
- Set the input of the sensor keys to floating to avoid
unnecessry current consumption.
- Removed activating of internal pullUp of the sabotage
input after sleep.
- Added sending of link partner problem frames after
not receiving a MAC_ACK.
Version 0.1.2 - 20150805
** Related Hardware
** Bugfix
- Corrected testframe for the two sensor buttons.
- Corrected device type.
- Corrected a bug with the delay time made in the past version.
- Removed workaround for missing pullups.
** Comments
*
Version 0.1.1 - 20150730
** Related Hardware
** Bugfix
- Corrected the polarity of the LED.
- Corrected pinout of the buttons.
- Corrected default values for filterA and filterB.
- Corrected default value for message position.
- Corrected default value for event delay.
** Comments
- Removed Sample interval parameter.
Version 0.1.0 - 20150720
** Related Hardware
** Bugfix
*
** Comments
- Initial version. Due to the rotary handle sensor is similar
to the other contact sensors, this is a copy of the code.
--- END OF FILE ---
** Bugfix
- <JIRA Vorgangsnummer (optional)> -
- <JIRA Vorgangsnummer (optional)> -
** New Feature
- <JIRA Vorgangsnummer (optional)> -
- <JIRA Vorgangsnummer (optional)> -
** Modification
- <JIRA Vorgangsnummer (optional)> -
- <JIRA Vorgangsnummer (optional)> -
** Improvement
- <JIRA Vorgangsnummer (optional)> -
- <JIRA Vorgangsnummer (optional)> -
** Bugs
- <JIRA Vorgangsnummer (optional)> -
- <JIRA Vorgangsnummer (optional)> -
** Related Hardware
- - <zusätzliche Hinweise, Modifikationen usw.>
** Comments