sha256: 268cabd17a294e169fb4d6ac147a0b7807c0ddeacc05918cfa645919fb34e967
C H A N G E L O G
Please note: Only use the firmware file in connection with the current software-version
of the CCUx!
Device: HmIP-WRC6 - Homematic IP Wall-mount Remote Control - 6 buttons
Company: eQ-3, Maiburger Str. 29, 26789 Leer, Germany
Version 1.0.19 - 2016-11-8
** Related Hardware
- RC8 142342E-SA
- WRC6 142468C-SA main board
142469B-SA button board
- DBB PCBA no available
** Bugfix
- [HMIP_RC8-40]Device send no Unconditional Switch Command with ARR-Bit with long key press
Version 1.0.18 - 2016-11-4
** Related Hardware
- RC8 142342E-SA
- WRC6 142468C-SA main board
142469B-SA button board
- DBB PCBA no available
** Bugfix
- Fixed the bug of [HMIP-RC8-38] The LED is blinking red if the linkpartner is the system partner
Version 1.0.17 - 2016-11-1
** Related Hardware
- RC8 142342E-SA
- WRC6 142468C-SA main board
142469B-SA button board
- DBB PCBA no available
** Bugfix
- If the remoter get an acknowledge frame from a router, he is awake for 10 seconds and blinks then green.
- Send one linker partner IP (default for first one) to the SNC for report linker problem.
Version 1.0.16 - 2016-10-14
** Related Hardware
- RC8 142342E-SA
- WRC6 142468C-SA main board
142469B-SA button board
- DBB PCBA no available
** Bugfix
- HMIP-RC8-32 Device send Report Linkpartner Problem after successfull sending
Version 1.0.15 - 2016-8-30
** Related Hardware
- RC8 142342E-SA
- WRC6 142468C-SA main board
142469B-SA button board
- DBB
** Improvement
- Add new target for HmIP-DBB ( One button)
- HmIP-DBB will have a buzzer (TBD). Buzzer function had finished, but no try.
Version 1.0.14 - 2016-7-15
** Related Hardware
- RC8 142342E-SA
- WRC6 142468C-SA main board
142469B-SA button board
** Bugfix
- HMIP-RC8-31 The LED is blinking red if the system partner is a linkpartner
- Fixed the same bug that exist in ASIR
(HMIP_ASIR-15) The LED shows the boot sequence even if the button is pressed for factory reset
Version 1.0.10 - 2016-6-17
** Related Hardware
- RC8 142342E-SA
- WRC6 142468C-SA main board
142469B-SA button board
** Bugfix
- Fixed the bug of test mode. Sleep mode no work well.
Version 1.0.8 - 2016-5-20
** Related Hardware
- RC8 142342E-SA
- WRC6 142468C-SA main board
142469B-SA button board
** Comments
- changed the linker information as:
--predefine="-DROM_SIZE=0x20000"
--predefine="-DRAM_CODE_SIZE=0xc00"
--predefine="-DSIZE_OF_BOOTLOADER=0x1800"
--predefine="-DSIZE_OF_PERSIST_DATA=0x800"
Version 1.0.6 - 2016-5-20
** Related Hardware
- RC8 142342E-SA
- WRC6 142468C-SA main board
142469B-SA button board
** Comments
- Changed the MCU to EFM32G210F p/n 150433
- Remove the "bootloader_rom_link.s " from the project as the bigger MCU had the AES hardware
Version 1.0.4 - 2016-4-25
** Related Hardware
- RC8 142342E-SA
- WRC6 142468C-SA main board
142469B-SA button board
** Comments
Release a new version
--- END OF FILE ---