sha256: f3d8e42a912185c76a1279d15a576913ab4eb47d593fceb208bf33b4393d858c
C H A N G E L O G
Please note: Only use the firmware file in connection with the current software-version of the CCUx!
Device: HmIPW-DRI32 - Homematic IP Wired Input Module - 32 channels
Company: eQ-3, Maiburger Str. 29, 26789 Leer, Germany
Version 1.4.6 - 2025-05-26
** Bugfix
- Wrong default value for parameter CYCLIC_INFO_MSG
Version 1.4.4 - 2025-05-20
** Bugfix
- Status info cyclic time is roundabout 60s
Version 1.4.2 - 2025-05-15
** Bugfix
- Device sends no dec identify by system button
- Eventcounter at send usc always 0
- Short button press is not always recognized correctly
- AppSeqNo is 0 after LongButtonPress
** Improvement
- Long button press cannot dim in conjunction with a motion detector.
Version 1.4.0 - 2025-01-31
** Bugfix
- Short key press of key visual leads to a restart, if a factory reset was aborted before
- Boot-Flag will not be set in a Status-Answer-Telegram
- Short button press is not always recognized correctly
- Offline alarming from Wired to Radio and Radio to Wired does not work
- Display is not updated after voltage reset.
- AppSeqNo is 0 after LongButtonPress
- Short key press of key visual leads to a restart, if a factory reset was aborted before
** Improvement
- Long button press cannot dim in conjunction with a motion detector.
- Improve switch command functionality by new implementation of local loopback, adding command cancelation and using node sending functionality.
- If possible, send multicasts only to PARTNER_ALL_WIRED_DEVICES instead of to PARTNER_ALL_DEVICES.
Version 1.2.4 - 2022-12-05
** Improvement
- General improvements - Code optimisation
- General improvements - Code optimisation
Version 1.2.2 - 2018-09-10
** Bugfix
- If more than one status ACK frame is within the answer queue only the first one is send. Afterwards every new status ACK only triggers the last one
- Statusinfo module creates status ACK telegrams with set ACK, ARR and Boot bits if this is the first status to be sent after startup
- HmIP_APP: Send node confusion when using external send nodes
- Sometimes Statusinfo uses old ApplicationSequenceNumber and Statusinfo with ACK get lost
- Answer-Frames are sometimes sent to the wrong IP destination
Version 1.2.0 - 2018-07-06
** Bugfix
- If an input is configured as a switch, a long keystroke is sent when the input is opened.
- Fix CCM flags according to RFC3610
** Improvement
- Add new parameter for Contrast
- Unify values for undervoltage
--- END OF FILE ---